Skip to content

There are 7 differences between indoor and outdoor LED displays

 - There are 7 differences between indoor and outdoor LED displays

A total of 7 catalogues are available

  1. The benefits
  2. Luminosity
  3. Suitable for water
  4. The installation process
  5. The price
  6. The conditions
  7. The resolution
  8. The benefits

1.The benefits

Let’s start with indoor LED displays. Traditionally, indoor LED displays were surface-mounted. High definition and bright colors are the main characteristics of indoor surface displays, but their disadvantage is their high price.

The outdoor display consists mainly of exterior lamps. In general, indoor displays are surface-mounted. The brightness of outdoor LED display screens is relatively stronger due to the high outdoor sunshine. As a result, indoor display screens have a lower brightness than outdoor display screens. Outdoor and semi-outdoor module unit boards have high brightness, waterproof properties, and colorful appearances. Its disadvantage is that it requires technical guidance during installation.

2.Luminosity

If the indoor unit board is used outdoors, the brightness falls far short of the requirements, and it does not appear bright enough. Indoor LED unit boards have a much lower brightness than outdoor LED unit boards. The brightness of the outdoor unit board, however, is too bright when used indoors. Please use the indoor unit board instead.

LED displays for indoors and outdoors

3.It is waterproof

Outdoor products must have waterproof surfaces. Therefore, the outdoor display screen should be waterproof, so the outdoor display screen is made of a waterproof box. Indoor monitors can also be made from boxes or not. It is not enough to have a waterproof back on the box used outdoors if it is relatively simple and inexpensive. The box’s boundary must be well covered in this case. In most cases, these boxes are filled with glue, but not indoors. The following are three methods of waterproofing and moisture-proofing LED displays.

4.Setting up

Depending on the environment, LED display screens can be installed in a variety of ways, including wall-mounted, cantilever, inlaid, vertical, standing, top-mounted, mobile, arc, and other ways. With few styles and relatively simple installation, indoor installation is convenient and simple. In contrast, outdoor LED displays are dangerous and difficult to install.

 - There are 7 differences between indoor and outdoor LED displays

5.The price

Indoor LED display screens are generally not far away from the viewer. Therefore, its definition and price are higher than those of outdoor LED displays. LED display screens used outdoors have a longer viewing distance than those used indoors. Too high a definition makes it difficult to see clearly. LED displays are therefore customized according to the actual viewing distance, and the price will vary accordingly. What is the current price of outdoor LED displays and indoor LED displays?

6.The conditions

Different conditions can be tolerated by LED displays. Rain, high temperatures, continuous sunlight, and dust are not a problem for outdoor LED displays. A typical outdoor LED display has an IP65 waterproof grade, compared to an IP20 waterproof indoor LED display. It can withstand extreme sunlight and lightning, as well as resist geographical leakage. Such a feature is not needed for the indoor display.

7.The resolution

LED displays are better when they have a higher resolution. Indoor LED display screens have the highest resolution of the two for closer viewing, and LED display screens are famous for their high resolution. Compared to indoor LED screens, outdoor LED screens have a higher pixel spacing resolution and a lower resolution for viewing from a distance.

Leave a Reply

Your email address will not be published. Required fields are marked *

× How can I help you?